contact us
Leave Your Message
Products Categories
Featured Products
WMXT Series-Square drive hydraulic torque wrench

WMXT Series-Square drive hydraulic torque wrench
WKLC Series - Low profile hydraulic torque wrench

WKLC Series - Low profile hydraulic torque wrench
WHCW Series -Low profile hydraulic torque wrench

WHCW Series -Low profile hydraulic torque wrench
Low Profile Cassettes Hex Link for Hydraulic Hexagon Wrench

Low Profile Cassettes Hex Link for Hydraulic Hexagon Wrench
WHL series -Single stage hydraulic bolt tensioner

WHL series -Single stage hydraulic bolt tensioner
WMS series -Multi-stage hydraulic bolt tensioner

WMS series -Multi-stage hydraulic bolt tensioner
WPA-B-PB series -Pneumatic pump for bolt tensioner

WPA-B-PB series -Pneumatic pump for bolt tensioner
WPM-B Series Ultra High Pressure Manual Pump for Bolt Tensioner

WPM-B Series Ultra High Pressure Manual Pump for Bolt Tensioner
WPE-T3 series-3 Stage Electric Hydraulic Pump

WPE-T3 series-3 Stage Electric Hydraulic Pump
WPA-B-PT series -Pneumatic pump for torque wrench

WPA-B-PT series -Pneumatic pump for torque wrench
01
218A-001(1).png
218A-002(1).png
218B.png
219B.png

W218-219 Safety Cage Mechanical Puller

Safety Cage jaw retention system.

Roll threaded shafts for less effort when applying high torque.

Slim tapered jaws for improved gripping in tight spots.

Available in 2 and 3 jaw design and inside and outside and outside pulling configuration.

More efficient pulling, as one man can do the job where manual pullers often require two operators.

High force hydraulic system for effortless pulling of large components.

    Contact us
    product details

    W218A

    Model No.

    Number of Jaws

    Reach(mm/in)

    Spread(mm/in)

    Capacity（T/KN）

    Center Bolt Dia.(mm/in)

    Weight(Kg/lbs)

    EP-204

    2

    101/3.98

    12-127[0.47-5]

    2/19.61

    14/0.55

    1.4/3.09

    EP-104

    3

    101/3.98

    12-127[0.47-5]

    5/49.03

    14/0.55

    1.8/3.97

    EP-206

    2

    152/6

    12-178[0.47-7.01]

    6/58.84

    16/0.63

    3.2/7.05

    EP-106

    3

    152/6

    12-178[0.47-7.01]

    10/98.07

    16/0.63

    3.6/7.94

    EP-208

    2

    203/8

    19-304[0.75-11.98]

    12/117.68

    20/0.79

    5.4/11.9

    EP-108

    3

    203/8

    19-304[0.75-11.98]

    17/166.71

    20/0.79

    6.4/14.11

    EP-210

    2

    245/9.65

    25-381[0.98-15]

    14/137.29

    20/0.79

    5.9/13.01

    EP-110

    3

    245/9.65

    25-381[0.98-15]

    20/196.13

    20/0.79

    7.3/16.09

    EP-213

    2

    304/12

    63-457[2.48-18]

    25/245.17

    29/1.14

    17.2/37.92

    EP-113

    3

    304/12

    63-457[2.48-18]

    30/294.2

    29/1.14

    20/44.09

    EP-216

    2

    355/13.98

    76-635[3-25]

    35/343.23

    31/1.22

    25.8/56.88

    EP-116

    3

    355/13.98

    76-635[3-25]

    40/392.27

    31/1.22

    30.8/67.9

    W218B

    Model No.

    Number of Jaws

    Capacity（T/KN）

    Cylinder

    Stroke(mm/in）

    Spread(mm/in）

    Max.Reach(mm/in)

    Weight(Kg/lbs)

    EPH-208

    2  Jaw   Puller

    10/98.07

    RC-106

    152/6

    19-304[0.75-11.98]

    203/8

    10/22.05

    EPH-208*

    10*/98.07

    RC-106

    152/6

    19-304[0.75-11.98]

    203/8

    27/59.52

    EPH-210

    15/147.1

    RC-1510

    254/10

    25-381[0.98-15]

    245/9.65

    22/48.5

    EPH-210*

    15*/147.1

    RC-1510

    254/10

    25-381[0.98-15]

    245/9.65

    38/83.78

    EPH-213

    25/245.17

    RC-2514

    362/14.25

    63-457[2.48-18]

    304/12

    44/97

    EPH-213*

    25*/245.17

    RC-2514

    362/14.25

    63-457[2.48-18]

    304/12

    53/116.84

    EPH-216

    50/490.33

    RC-5013

    336/13.23

    76-635[3-25]

    355/13.98

    87/191.8

    EPH-216*

    50*/490.33

    RC-5013

    336/13.23

    76-635[3-25]

    355/13.98

    123/271.17

    EPH-108

    3  Jaw Puller

    10/98.07

    RC-106

    152/6

    19-304[0.75-11.98]

    203/8

    11/24.25

    EPH-108*

    10*/98.07

    RC-106

    152/6

    19-304[0.75-11.98]

    203/8

    28/61.73

    EPH-110

    15/147.1

    RC-1510

    254/10

    25-381[0.98-15]

    245/9.65

    23/50.71

    EPH-110*

    15*/147.1

    RC-1510

    254/10

    25-381[0.98-15]

    245/9.65

    39/85.98

    EPH-113

    25/245.17

    RC-2514

    362/14.25

    63-457[2.48-18]

    304/12

    48/105.82

    EPH-113*

    25*/245.17

    RC-2514

    362/14.25

    63-457[2.48-18]

    304/12

    57/125.66

    EPH-116

    50/490.33

    RC-5013

    336/13.23

    76-635[3-25]

    355/13.98

    91/200.62

    EPH-116*

    50*/490.33

    RC-5013

    336/13.23

    76-635[3-25]

    355/13.98

    127/279.99

    W219B

    Three jaws move simultaneously fast center pointed.
    Supplied with a full hydraulic set including pump, hose, cylinder, gauge, gauge adaptor and wooden case.
    Model No. Capacity（T/KN) Max.reach（mm/in） Max. spread（mm/in） Weight(kg/lbs)
    KY10 10/98.07 296/11.65 350/13.78 12/26.46
    KY20 20/196.13 320/12.6 480/18.9 34/74.96
    KY30 30/294.2 407/16.02 580/22.83 60/132.28
    KY60 60/588.4 727/28.62 920/36.22 90/198.42

    How to Use a Hydraulic Puller

    Choose the right puller for the job. The size and capacity of the puller you need will depend on the size and weight of the component you are removing.
    Select the appropriate adapter. The adapter is what connects the puller to the component you are removing. There are many different types of adapters available, so be sure to choose the one that is right for your application.
    Attach the adapter to the puller. The adapter should be screwed or bolted securely to the puller.
    Position the puller on the component. The puller should be positioned so that the adapter is centered on the component you are removing.
    Pump the handle to extend the ram. The ram is the part of the puller that applies pressure to the component. As you pump the handle, the ram will extend and push against the component.
    Continue pumping the handle until the component is removed. The amount of force required to remove the component will vary depending on the size and weight of the component, as well as the amount of corrosion or rust that is present.
    Once the component is removed, slowly release the pressure by turning the pressure release valve. This will prevent the ram from retracting too quickly and damaging the puller or the surrounding area.
    Repeat steps 5-7 for each component you need to remove.

    Safety Precautions

    Always wear safety glasses and gloves when using a hydraulic puller. Hydraulic pressure can be dangerous, and it is important to protect yourself from injury.
    Make sure the puller is stable before applying pressure. The puller should be firmly anchored to the workpiece or to a sturdy support surface.
    Do not exceed the rated capacity of the puller. Using a puller that is too small for the job can result in damage to the puller or the surrounding area.
    Never use a damaged or defective puller. If the puller is damaged, it should be repaired or replaced before use.
    Bleed the air out of the hydraulic system before using the puller. Air in the system can cause the puller to operate erratically or not at all.
    Store the puller in a clean, dry place when not in use. This will help to prevent the puller from rusting or corroding.

    description2

    Leave Your Message